Lubricants For Extrusion
Baraldi Billet Cutting Lubricants are designed to ensure the Billet is ready for cutting after heating and before extrusion.
STAG 40/BC/2
ADVANTAGES
-
Completely free of mineral oil and Chlorine additives
-
Is fully Biodegradable
-
Suitable for both cold and hot cutting
-
Excellent to recover chips and scraps for reprocessing.
Baraldi Lubricants for extrusion.
Beraldi Piston / Dummy Block lubricants meets the following requirements:
-
Good adhesion to the billet
-
Good anti-adherent power
-
No hazardous fumes or vapors
-
Non Flammable at working temperature
-
Does not accumulate on the slide
-
Does not make the floor slippery
-
Without environmental impact
STAG 11
Water based release agent for Extrusion of metals and alloys
ADVANTAGES
Innovative Lubricant in aqueous solution, approved by both extruders and OEM. Formulated on the basis of synthetic active components.
-
Excellent adhesion and filming capacity on surfaces with temperatures above 400 degrees Celsius
-
Excellent release / anti-sticking action
-
Non-flammable non-harmful
-
Free of oil does not develop harmful fumes or vapors
-
No nozzle clogging, easy washable
-
Cleanliness of floor and profiles
Case Study on the health benefits of replacing Boron Nitride powder with Stag 11
Baraldi Shear lubricants are designed to lubricate and protect in high temperature and friction conditions
Baraldi lubricants meet the following requirements:
-
Good adhesion to treated surfaces
-
Maximum lubricating and anti-seizing power
-
High flash point
-
Without impact on operators and environment
STAG RP/1
Innovative water soluble product for Butt-shear and saw in Extrusion of metal alloys
ADVANTAGES
-
Very high lubricating and anti-seizing power
-
Very low risk of flammability
-
Reduced harmfulness
-
Water content allows it to have cooling properties
STAG 98/AL
Innovative neat oil. Anhydrous lubricant for the extrusion of Aluminium alloys
ADVANTAGES
-
100% synthetic
-
High flash point
-
Without labeling
Baraldi Profile Cutting Lubricants are developed to ensure no residue of the lubricants remain on the profiles after heat treatment
STAG 15/PC
Special lubricant for Aluminium extruded profile cutting
ADVANTAGES
-
Made of specially selected raw materials of mineral origin
-
Reduces oil and carbon residues on the profile after heat treatment
STAG 16/PC
Special lubricant for Aluminium extruded profile cutting
ADVANTAGES
-
Made of specially selected premium synthetic raw materials
-
Vanishing: It does not leave any residue on ther profile after heat treatment.
Baraldi Auxiliary lubricants are specially designed for Sealing and Anti-sticking/Anti-seizing capacities on contact surfaces: Piston/container and Container/mixer holders
B-TECH Paste 2102
ADVANTAGES
-
Pigmented paste
-
Enables high throughput
-
Compatible with high working temperatures
Baraldi lubricants provides the necessary protective film before the products are pre-heated in the oven.
SPRAYGRAPH G30
Baraldi SPRAYGRAPH G30 is designed to provide a protective film before preheating in the oven
ADVANTAGES
-
Dry lubricant aerosol
-
Protects the die
-
No Fumes or steam in production during preheating
-
Easy and fast application